Specifications

Cube Installation and Setup
Entero HB Rear-Access Cube Installation and Setup Manual 17
020-101007-04 Rev. 1 (12-2014)
1. Determine where the cables connecting the cubes will pass through the panels, and install a
cable cover over all other exposed openings.
2. If space behind the display wall is limited, insert the long screen-
holding bolts into the back of the cubes before the cubes are
installed.
3. Install the first row of cube enclosures starting from the center and
working outwards.
a. From the back of the display structure, lift the cube enclosure
over the pedestal or cube row and lower it in the center of the
pedestal or cube.
A
To fasten side-by-side display cubes together,
connect at the four points on each side panel.
B
To fasten the display cube to the pedestal or to
the cube below, connect at the two points at the
back and the two points at the front.
C
To fasten the display cube to the pedestal or
cube below it, connect at the two points on the
support bracket. (CC67/CC70/CC72/CC70HD/
CC80 display cubes only)
i
• A crew of two or more can lift a display cube into position on the
first row.
A
B
A
A
A
B
B
C
C
long screen bolts
short bolts
(used only on top row)