Specifications

Entero HB Rear-Access Cube Installation and Setup Manual 24

020-101007-04 Rev. 1 (12-2014)

Projector Installation

and Setup

The projector is designed for installation in a Christie cube display or a custom display structure.

Before installing projectors, make sure that the screens have been installed and that screen depth

and height adjustments are complete. See Determine the optimal gap between screens on page 19.

The projection head is intended to be used in an upright position or 90° to normal for cube

mounting.

Projector components

• Ambient temperature must stay below 35° C (95° F). For best performance and reliability, an

ambient temperature of less than 25° C is recommended.

• Keep the projector away from all devices radiating electromagnetic energy. For example, motors,

transformers, speakers, power amplifiers, and elevators.

Power Module

Lens