Specifications

Projector Installation and Setup

Entero HB Rear-Access Cube Installation and Setup Manual 27

020-101007-04 Rev. 1 (12-2014)

2. Align the mounting holes on the projector assembly tray with the mounting plate.

3. Install the eight M6 cap screws and flat washers. Tighten all screws to a torque setting of 4.5

Nm/40 lbf–in.

Tips for running external cables to the displays

All Christie cubes have channels for cable routing. Cable covers are included for external cube walls.

• Route cables across the display wall through the pedestals.

• Always keep cables to the required length to avoid excess.

• Run cables through the horizontal and vertical cable channels

(see image).

• When cabling is complete, bundle the cables with zip ties. Zip

ties are not included with the projector.

• Avoid putting any strain on the cables and connectors.

• The illustration above shows the mounting plate holes and projector assembly from the front of the

cube for ease of viewing.

• The cube model determines the type and height of the mounting plate.