Specifications

Projector Installation and Setup
Entero HB Rear-Access Cube Installation and Setup Manual 30
020-101007-04 Rev. 1 (12-2014)
Ethernet network using hub
With this configuration, one benefit is that if there is a projector failure in the array, the remaining
projectors remain synchronized across the array. The disadvantages of this configuration is that an
external switch is required, and there is more cabling required.
Ethernet network using daisy chain
With the daisy chain configuration, an external switch is not required and there is less cabling;
however if there is a projector failure in this configuration, the display wall is separated into two
independent arrays for ArraySync color and brightness management.
Notice. Failure to comply with the following may result in property damage.
• Do not connect the last display in the Ethernet daisy chain to the first display or the Ethernet hub,
as it creates a network loop and may cause displays to be undetected in the WebUI.