Specifications

Adjust the Image
Entero HB Rear-Access Cube Installation and Setup Manual 40
020-101007-04 Rev. 1 (12-2014)
B1
B1
B2
B2
C1
C1
C2
C2
B1
B2
D1
D1
D1
C1
C2
Image Problem Screws to Adjust
Direction of Movement by
Mirror During Adjustment
Image Problem Screws to Adjust
Linearity Problem
A1
B1
B2
D1
A1
A1
A1
A1
C1
C2
To pull the mirror, turn thumbscrews
clockwise in zones C1-C2.
To pull the mirror, turn thumbscrews
clockwise in zones C and D,
and counter-clockwise in D1.
To push the mirror, turn thumbscrews
counter-clockwise in zones A-A1-B.
To push the mirror, turn thumbscrews
counter-clockwise in zones C and B.
- or -
To pull the mirror, turn thumbscrews
clockwise in zones A-A1-B and C-D-D1.
- or -
To pull the mirror, turn thumbscrews
counter-clockwise in zones D-D1.
NOTE: This adjustment is
required if the mirror is slightly
curved in.