Specifications

Configure the display wall
Entero HB Rear-Access Cube Installation and Setup Manual 46
020-101007-04 Rev. 1 (12-2014)
3. To automatically configure the network settings, set DHCP to On.
4. To manually configure the network settings for a single display, set DHCP to Off and fill out
each of the network setting fields.
Each field must be filled out in order for the settings to be applied.
5. Click Submit.
Connect the displays to WiFi (WiFi model only)
From the OSD
1. To access the Main Menu on the OSD, press Menu on the IR remote.
2. Select Display Configuration > Wireless.
3. Select Wifi Mode: On.
4. Select Apply Wireless Settings.
From the WebUI
1. Select Display Configuration > Wireless.
2. Select the desired display(s) either from the Detailed System Status section or the Display Grid,
or click Select All.
3. Select Wifi Mode: On.
4. Click Apply.