Specifications

Entero HB Rear-Access Cube Installation and Setup Manual 49
020-101007-04 Rev. 1 (12-2014)
Preventative
Maintenance
Clean the mirror
Items Required
• Distilled or de-ionized water
• Isopropyl alcohol (high purity with no coloration or additives)
• Clean pure acetone (high purity with no additives)
• Lint–free cloths (without color)
• Cotton swabs, with non-synthetic stalks (wooden-stick)
• Dry clean compressed air
• Cotton exam gloves or vinyl or latex exam gloves
Prerequisites
• Make sure the work area is free of fumes, fluids, and dust.
• Put a support below the mirror to make sure it is equally supported during cleaning.
• Use cotton, vinyl, or latex gloves when handling the mirror.
Remove water droplet rings, marks, and other surface stains
Use isopropyl alcohol on the corner of a cotton wipe or a swab to dab the area. If stains cannot be
removed with the isopropyl alcohol, use acetone as an alternative. Stains located in or under the
protective layer cannot be removed.
Notice. Failure to comply with the following may result in property damage.
• Typically, it is not necessary to clean the mirror; however, if required do not use ammoniated
window cleaner. This can damage the protective layer of the mirror. Aggressive cleaning techniques
increase the risk of mirror damage.
Notice. Failure to comply with the following may result in property damage.
• Make sure no direct or diffused sunlight is in the room. Do not wipe or rub the mirror surface. Only
lightly touch or dab the mirror.