Specifications

Preventative Maintenance
Entero HB Rear-Access Cube Installation and Setup Manual 50
020-101007-04 Rev. 1 (12-2014)
Remove finger prints
1. Use a lint–free cotton cloth with acetone and alcohol to dab the stain. For a hard-to-remove
finger print, use a cotton swab dipped in acetone.
2. Use compressed air to dry the solvent.
Clean the screen
Kits or items required
• Mild soap or detergent diluted with warm water
• Lint–free cloths (without color)
•Chamois
• Cotton exam gloves or vinyl or latex exam gloves
Prerequisites
• Make sure the work area is free of fumes, fluids, and dust.
• Never drop or slide screens on their edges or surfaces.
• Before laying screens onto flat work surfaces, lay foam slip sheets down to protect the screen.
• Avoid laying screens on uneven or dirty work surfaces. Small chips or dirt particles can damage
the screen surface.
• Use cotton, vinyl, or latex gloves when touching or handling the screen.
Instructions
1. Apply soap or detergent solution to a lint–free cloth.
2. To remove dirt or oils wipe the screen surface. Apply light pressure only.
3. To wipe the soap from the screen surface, use another lint–free cloth and clean water. Apply
light pressure only.
4. To blot the surface dry, use a dry lint–free cloth.
i
• Typically, it is not necessary to clean the screen; however, if required following the guidelines listed
here.