Specifications

Specifications
Entero HB Rear-Access Cube Installation and Setup Manual 54
020-101007-04 Rev. 1 (12-2014)
HD models
Due to continuing research, specifications are subject to change without notice.
70” Cube
Screen gap (image to
image)
1mm nominal gap (allows for environmental fluctuations)
Power rating
(engine)
voltage range 100 to 240VAC, 4.3A, 50-60Hz
power
consumption
135W/190W/220W (eco/normal/High Brightness)
dissipation 460/648/750 BTU/hr (eco/normal/high brightness)
Physical
characteristics
screen size 61.1 x 34.4” (1551 x 873mm)
cube depth
(total)
39.7” (1009mm)
weight – cube 221 lbs (100 kg)
weight – engine 55 lbs (25 kg)
weight – screen 78 lbs (35.4 kg)
stacking
capability
Maximum of up to five units high, depending on the type of pedestal used. Tie
backs or lag bolts required for >1 unit high.
service access rear (light weight rear access panels)
audible noise <30 dBA, ultra-quiet operation
Environment
operating
Cube: 40° to 90°F (5° to 35°C)
Engine: 32° to 104°F (0° to 40°C)
Screen: 63° to 88°F (17° to 31°C)
non-operating Cube: -4° to 122°F (-20° to 50°C)
Engine: -13° to 158°F (-25° to 70°C)
Screen: -4° to 95°F (-20° to 35°C)
humidity • cube/engine 20% to 80% non-condensing
• 35% to 65% non-condensing for storage
• screen: 40% to 60% non-condensing
altitude 0 – 3,000 m / 0 – 10,000 ft