Instruction manual

CP2215 Quick Start Guide 29
020-101295-01 Rev. 2 (05-2014)
Specifications
This section provides detailed specifications for the Christie CP2215 projector. Due to continuing
research, specifications are subject to change without notice.
Power Requirements
AC Input (A)
Below 200VAC, when the lamp is ignited, a 25 A input surge current might occur for three seconds.
UPS AC Input (B)
Item Description
Circuit Breaker 20A
Voltage Range 200 - 240 VAC
Line Frequency 50 Hz - 60 Hz nominal
Inrush Current <85 A maximum
Current Consumption 16 A maximum (at 200 VAC)
Power Consumption 3200 W maximum
Current Rating of AC Input 20A (Outlet is IEC 320-C19)
Line Cord Plug Type NEMA 6-20P
Item Description
Activation Discrete switch above the power inlet cord(s)
Current Rating of AC Input 8A (Outlet is IEC-320-C13)
Supported UPS Type Universal 100-240VAC
Power Consumption 270 W typical (@ 100 VAC with a power factor of 0.9)