Instruction manual

Installation and Setup
CP2215 Quick Start Guide 4
020-101295-01 Rev. 2 (05-2014)
Projector Components - Rear
Position the Projector
1. If you are installing the projector in the optional rack stand (P/N 108-416102-XX) follow the
instructions provided with the rack stand to install it.
2. Position the projector so it is centered and parallel with the theatre screen. If space is limited,
aim the projector slightly off-center and use lens offset to center the image on the screen.
D Air Filter Cover and Air Filter
Located behind the air filter cover is a replaceable air filter. The air filter filters the
intake air before it begins circulating in the front compartment to cool the main
electronics.
E Air Intake
F Projector Lens
See Optional Accessories on page 33 for a list of available lenses.
G Top Lid
A Service Access Door
B Power Cord and AC Receptacle
C Lamp Access Door
• Two people are required to safely lift and install the projector.
• Complete a lamp adjust whenever you move or level the projector or replace the lamp.