User`s manual

OPERATION
RPMS, CS50 & CS70-D100U/UF User’s Manual 3-21
USING “TILED” RESIZE PRESETS – When you are working with a display wall you
will want to resize the image according to the
size of your wall. The last four “tiled”
resize presets are for this purpose. These options are only available when a display
wall has been defined in the Tiling Setup menu. See Working with Multiple
Projectors later in this section for instructions on how to define you display wall.
•
SELECT TILED FULL SIZE to fill all screens in the
defined array with the data from the incoming
signal. The data will be stretched horizontally and
vertically to fill all screens – this option does not
maintain aspect ratio.
•
SELECT TILED FULL WIDTH to fill all screens
from left-to-right with the data from the
incoming signal. The data will fill the width of
the array leaving a top and bottom black border
- aspect ratio maintained. Best suited for
HDTV signal.
•
SELECT TILED FULL HEIGHT to fill all screens
from top-to-bottom with the data from the
incoming signal. The data will fill the array
vertically while maintaining aspect ratio –
black borders will appear on the left and right
of the image.
•
SELECT TILED ANAMORPHIC to display a
“wide-screen” (anamorphic) image in a 16:9
aspect ratio.
Size – controls both the image width and height in tandem, maintaining the current
aspect ratio (proportion) of data from the incoming signal.