User`s manual

OPERATION
RPMS, CS50 & CS70-D100U/UF User’s Manual 3-35
Use the options in the Configuration menu to change system parameters to suit your
preferences, run diagnostics and access the Service Menu. These options should only
be modified by experienced users and technicians and typically don’t require
modification when switching sources.
Figure 3.17. Configuration Menu
Image Orientation - Use this pull down list to change the orientation of the image
to suit the installation. For example, if the projector is being used in a rear-screen
application with a first-surface optical mirror, the image must be inverted and flipped
– select Inverted Rear.
The other orientations available are: Front, Rear, and Inverted Front.
Language - You can select which language you want to view the menus in. The
options are English, French, Spanish, German and Italian. The menus will change
immediately upon selection.
Menu Preferences
Menu Preferences is a sub-menu that provides options to adjust the way on-screen
menus are viewed in presentation level. Changes made in this sub-menu will be
viewed immediately.
Figure 3.18. Menu Preferences Menu
MENU LOCATION – Use the pull down list to choose a default location for the display
of on-screen menus. 7 preset and 1 custom locations are available.
To create a custom menu location, choose a preset that is closest to the desired area.
Then adjust the slidebars of Horizontal Shift and Vertical Shift to move the menu to
the desired location. Menus may differ in size and therefore it is recommended that
you do not choose a location too close to a corner or edge to prevent cropping larger
menus.
HORIZONTAL SHIFT AND MENU SHIFT – Adjust the slidebars to move the menu to a
desired location. Used when defining a custom menu location.
3.7 System
Configuration