User`s manual

OPERATION
RPMS, CS50 & CS70-D100U/UF User’s Manual 3-37
Color and Uniformity
Select Color and Uniformity to access sub-menus Color Temperature, Adjust
Primary Colors (CSC) or Brightness Uniformity.
Figure 3.20. Color and Uniformity Menu
COLOR TEMP SETUP – Refer to Color Temperature Setup description under Image
Settings.
ADJUST PRIMARY COLORS - Select this sub-menu to access options that will assist
you in adjusting primary colors and intensity. This is particularly important in
multiple screen installations where the color and intensity of one screen must
precisely match all other adjacent screens to create a seamless image.
Primary color adjustments affect all sources and can be applied or disabled at any
time by entering or deleting a checkmark at the top of the Adjust Primary Colors
menu (Primary Color Enable).
Refer to 3.12 Using Multiple Projectors – Matching Colors of Multiple Projectors
later in this section for a complete, step-by step procedure.
Figure 3.21. Adjust Primary Colors (CSC) Menu
BRIGHTNESS UNIFORMITY - This menu allows you to Enable Uniformity, and
access Test Pattern, White Uniformity, Color Temp Setup and Lamp options.
Enter a checkmark beside Enable Uniformity to enable various options to control
and smooth out overall color and brightness of an image – useful in multi-screen
applications. Adjust the options in this menu only after you have adjusted the primary
color in the Adjust Primary Colors menu.
Refer to Adjusting Brightness Uniformity later in this section. NOTE: Brightness
Uniformity is not available when White Boost is enabled.