User`s manual

OPERATION
RPMS, CS50 & CS70-D100U/UF User’s Manual 3-43
This read-only menu lists a variety of details about the standard and optional
components currently in use on the projector. Refer to the Status menu for versions of
hardware (left side) and software (right side) installed, the number of lamp hours
logged in total and for a specific period (such as a rental period), and for your
projector model name and serial number. In addition, the Status menu identifies the
current channel, switcher, slot and frequencies.
Use
ON
,
OFF
, or
to see additional Status information.
Auto Setup (item 7 in Main menu) enables the projector to quickly set up the image
for you. A separate message window appears and requests confirmation that you
want to continue with Auto Setup, in which case display parameters listed in the
Table below will be set for you. Selecting Auto Setup can save you some time in
setting up an image, and you can also make further adjustments as desired. You must
have an unlocked channel present to use this option.
What an “Auto Setup” Does
OPTIMIZES: SETS TO DEFAULT:
Pixel Tracking Contrast & Brightness
Pixel Phase Auto Input Level (off)
Size Blanking
Vertical Stretch Detail (if video source)
Position Filter
Input Levels (if analog source) Luma Delay
3.9 System Status
3.10 Auto Setup