Product data

94 PowerVM Migration from Physical to Virtual Storage
On the HMC
The HMC is now used to create client and server virtual SCSI adapters and
migrate the SCSI Storage controller to the correct profile.
7. Modify the client logical partition profile by removing the SCSI adapter with
the local attached disks. The physical location code that was noted from the
previous step 6 on page 93 was slot C4. Figure 5-2 shows the logical partition
profile properties.
Figure 5-2 Logical Partition Profile Properties panel
Select the correct storage controller, as shown in Figure 5-2, using slot C4.
Click the Remove tab, click OK, then click Close to remove the adapter from
the profile.
8. Select the client partition and display the virtual adapters list. Make a note of
a free slot number. This slot number will be required in a future step.
9. Select the Virtual I/O Server and add a virtual SCSI server adapter. You will
choose a free slot number on the Virtual I/O Server and map it to the slot
number that you made a note of in the previous step. In our case, the server