Product data

96 PowerVM Migration from Physical to Virtual Storage
10.Modify the Virtual I/O Server to add the SCSI adapter to the profile.
Figure 5-4 shows the storage controller in slot C4, which has been
highlighted, for addition to the profile.
Figure 5-4 Logical Partition Profile Properties panel
Click the Add as required tab, click OK, then click Close and return to the
HMC management server panel.
11.Now you must make the Virtual I/O Server use the newly added SCSI Storage
controller. There are two choices to make the Virtual I/O Server see the SCSI
Storage controller, which depend on the environment that are running in:
a. Use the Dynamic Logical Partition  Physical adapters  Add
function on the HMC Server Tasks panel to add the SCSI Storage
controller to the operating Virtual I/O Server.
If you use the dynamic method, once the HMC panel returns with no
errors, you must log in to the Virtual I/O Server as the padmin user and
issue the cfgdev command to configure the devices.
b. Reboot the Virtual I/O Server if it is practical to do so.