Product data

Chapter 5. Logical partition migrations 97
12.Create a client virtual SCSI adapter. Select your client partition and navigate
through, selecting your profile for the Create  Virtual Adapters task. You
can fill the panel in with the required information, similar to the panel shown in
Figure 5-5.
Figure 5-5 Create Virtual SCSI Adapter Panel
Ensure that the Virtual SCSI adapter number is the same as the free client
slot number that you identified previously and that the server adapter ID
matches the slot number used when you created the virtual SCSI server
adapter.
On the Virtual I/O Server
Verify that the correct devices have been created and perform the mapping of the
physical disk to the client logical partition.
13.Log in to the Virtual I/O Server as the padmin user ID.
a. To check that the creation of the new virtual SCSI server adapter has been
successful, use the lsdev command and notice that a new vhost has been
created, vhost4 in the example:
$ lsdev | grep vhost
vhost0 Available Virtual SCSI Server Adapter
vhost1 Available Virtual SCSI Server Adapter
vhost2 Available Virtual SCSI Server Adapter
vhost3 Available Virtual SCSI Server Adapter
vhost4 Available Virtual SCSI Server Adapter