Product data

Chapter 5. Logical partition migrations 105
On the HMC
The Fibre Channel adapter must now be remapped from the source partition to
the Virtual I/O Server so that the LUNs may be made available to the destination
partition as virtual SCSI disk.
1. Using the hardware location code for fcs0 from the previous step, open the
source partition’s profile panel and locate the physical Fibre Channel adapter.
In Figure 5-7, the correct Fibre Channel adapter in slot C4 has been
highlighted. Remove this Fibre Channel adapter from the partition profile.
Figure 5-7 Physical Fibre Channel Adapter to remove from source partition