Product data

Chapter 5. Logical partition migrations 127
As shown in Figure 5-20, you can now see that a Client Fibre Channel
Adapter has been created.
Figure 5-20 Client Fibre Channel Adapter
Note: You must exit the previous panel (Figure 5-20 on page 127) by
clicking OK for the resource to be saved correctly in the profile.
Exiting without clicking OK means that the POWER Hypervisor will not
assign world wide port names (WWPNs) to the client Fibre Channel
adapter and you will not be able to continue this migration. For further
details refer to 2.4, “Virtual Fibre Channel and N_Port ID virtualization”
on page 26.