Product data

132 PowerVM Migration from Physical to Virtual Storage
cannot see them at this stage). For further information refer to 2.4, “Virtual Fibre
Channel and N_Port ID virtualization” on page 26.
17.Boot to the SMS menu:
a. Type 5 and press Enter to access the Select Boot Options panel.
b. Type 1 and press Enter to access the Select Device Type panel.
c. Type 5 and press Enter to access the Hard Drive Panel.
d. Type 3 and press Enter to use SAN media.
18.At this point, the following screen is displayed:
-------------------------------------------------------------------------------
Select Media Adapter
1. U8204.E8A.10FE411-V4-C8-T1 /vdevice/vfc-client@30000008
2. List all devices
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key:
19.Type 1 and press Enter. At this stage the world wide port numbers are
presented to the SAN Fabric.
On the SAN switch and storage device
You have now:
򐂰 Created a client virtual Fibre Channel adapter
򐂰 Created a Virtual I/O Server Fibre Channel Adapter
Tip: You do not have to leave this screen. Leave it open so that you can
complete the procedure.