Product data

134 PowerVM Migration from Physical to Virtual Storage
d. Type 3 and press Enter to use SAN media.
At this point, the following screen is displayed:
-------------------------------------------------------------------------------
Select Media Adapter
1. U8204.E8A.10FE411-V4-C8-T1 /vdevice/vfc-client@30000008
2. List all devices
24.At the Select Media Adapter panel, type 1 and press Enter, which should
correspond to a vfc-client device. The slot number will be the client slot
number that was used when the client Virtual Fibre Channel adapter was
created:
U8204.E8A.10FE411-V4-C8-T1 /vdevice/vfc-client@30000008
a. You should now see a disk device presented. Select this device by typing
the number next to it. In this case type 1 and press Enter.
---------------------------------------------------------------------------
Select Device
Device Current Device
Number Position Name
1. - SCSI 14 GB FC Harddisk, part=2 (AIX 6.1.0)
( loc=U8204.E8A.10FE411-V4-C8-T1-W201300a0b811a662-L0 )
--------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key:1
b. Select the Normal Mode Boot task by typing 2, pressing Enter, typing 1,
and then pressing Enter again to exit the SMS menus.
The system has now booted the Virtual Fibre Channel disk.
25.There are a few last tasks to perform, which are orientated around proving
that the correct disks mapped:
a. Use the AIX lspv command to ensure that the disks have the correct
PVIDs on them:
# lspv
hdisk4 000fe4117e88efc0 rootvg active
hdisk5 000fe41181e1734c datasrcvg active