Product data

Chapter 5. Logical partition migrations 135
These PVIDs match the values that were recorded prior to the migration.
b. The AIX lsvg command also shows that the two volume groups are
present as expected:
# lsvg
rootvg
datasrcvg
c. Now list the Fibre Channel devices. Note that there are no physical Fibre
Channel cards, but there is a virtual Fibre Channel Client adapter:
# lsdev -C | grep ^f
fcnet0 Defined 00-08-01 Fibre Channel Network Protocol
Device
fcnet1 Defined 00-09-01 Fibre Channel Network Protocol
Device
fcs0 Defined 00-08 FC Adapter
fcs1 Defined 00-09 FC Adapter
fcs2 Available C8-T1 Virtual Fibre Channel Client
Adapter
fscsi0 Defined 00-08-02 FC SCSI I/O Controller Protocol
Device
fscsi1 Defined 00-09-02 FC SCSI I/O Controller Protocol
Device
fscsi2 Available C8-T1-01 FC SCSI I/O Controller Protocol
Device
fslv00 Defined Logical volume
d. Trace hdisk4 back to find the parent device:
# lsdev -l hdisk4 -F parent
fscsi2
# lsdev -l fscsi2 -F parent
fcs2
This proves that the disks are presented using the correct type of Fibre
Channel attachment.
e. Also check that the disks are correct with the AIX mpio_get_config
command:
# mpio_get_config -A
Storage Subsystem worldwide name: 60ab800114632000048ed17e
Storage Subsystem Name = 'ITSO_DS4800'
hdisk LUN # Ownership User Label
hdisk4 0 B (preferred) PW9405-17-1
hdisk5 1 B (preferred) PW9405-17-2