Product data

140 PowerVM Migration from Physical to Virtual Storage
vhost7 U8204.E8A.10FE411-V2-C18 0x00000004
VTD NO VIRTUAL TARGET DEVICE FOUND
Finally, the vhost server adapters are deleted using rmdev commands. Use
the -recursive option for the rmdev command to remove both the vhost adapter
and vtscsi targets with a single command:
$ rmdev -dev vhost6
vhost6 deleted
$ rmdev -dev vhost7
vhost7 deleted
On the HMC
The virtual SCSI adapters will be removed from the source partition and the
Virtual I/O Server and the source partition will be reconfigured to receive its disk
through the virtual Fibre Channel.
5. In the profile of the source partition that was shut down previously, remove the
virtual SCSI client adapters from the partition profile and add a virtual Fibre
Channel adapter. You will see something similar to the highlighted line in
Figure 5-25 on page 141 when this step is complete.