Product data

Chapter 6. Standalone SAN rootvg to virtual Fibre Channel 149
partition. Something similar to the highlighted portion in Figure 6-3 is what
you should see when this step is complete.
Figure 6-3 Virtual Fibre Channel client adapter defined in client logical partition profile
On the Virtual I/O Server
You will now activate the virtual adapters defined in the previous step and map
the virtual adapter to the physical Fibre Channel adapter.
4. Run the cfgdev command to configure the virtual Fibre Channel adapter.
5. Get the list of all available virtual Fibre Channel server adapters using the
lsdev command:
$ lsdev -dev vfchost*
name status description
vfchost0 Available Virtual FC Server Adapter