Product data

Chapter 7. Direct attached Fibre Channel devices partition to virtual Fibre Channel 163
c. Enter the virtual slot number for the Virtual Fibre Channel client adapter.
Then select the Virtual I/O Server partition to which the adapter may be
assigned and enter the server adapter ID, as in Figure 7-8. Click OK.
Figure 7-8 Define virtual adapter ID Values
d. Click OK  OK  Close.
On the Virtual I/O Server
On the Virtual I/O Server, ensure the correct setup for virtual Fibre Channel:
9. Log in to the Virtual I/O Server partition as user padmin.
10.Run the cfgdev command to configure the virtual Fibre Channel server
adapter.
11.The command lsdev -dev vfchost* lists all available virtual Fibre Channel
server adapters in the Virtual I/O Server partition:
$ lsdev -dev vfchost*
name status description
vfchost0 Available Virtual FC Server Adapter
$