Product data

Chapter 7. Direct attached Fibre Channel devices partition to virtual Fibre Channel 165
On the HMC: part 2
Now you have created the virtual Fibre Channel adapters for both the server on
the Virtual I/O Server and on the client partition. You must correct the SAN
zoning in the SAN switch. Use the HMC to get the correct port details:
15.To determine the world wide port numbers to be used in the new SAN zoning,
perform the following steps:
a. On the HMC select the appropriate virtual I/O client partition, then click
Task  Properties. Expand the Virtual Adapters tab, select the Client
Fibre Channel client adapter, then select Actions  Properties to list the
properties of the virtual Client Fibre Channel client adapter, as in
Figure 7-9.
Figure 7-9 Select virtual Fibre Channel client adapter properties