Product data

Chapter 2. Core procedures 21
On the HMC
The objective is to create the server and client adapters that will allow the disks
being presented from a physical Fibre Channel adapter to be visible to a client
partition.
1. On the HMC, you will see a panel similar to Figure 2-3 if you display the
physical adapters attached to the Virtual I/O Server. In our example, the
highlighted Fibre Channel adapter in slot C1 will be used.
Figure 2-3 HMC Virtual I/O Server Physical Adapters panel
2. Select the client partition and display the Virtual Adapters panel. Make a note
of a free slot number. This slot number will be needed in the following step.
3. Select the Virtual I/O Server and add a virtual SCSI server adapter. You will
choose a free slot number on the Virtual I/O Server and map it to the slot
number that you made a note of in the previous step. In our case, the server
slot number is 17 and the client slot number is 9. In our example, the adapter