Product data

Chapter 2. Core procedures 29
2. Create the virtual Fibre Channel client adapter in the client partition profile. If
you want the adapter and storage to be visible after a partition shutdown,
save the configuration to a new profile and use the new profile when starting
up the partition. You should see something similar to the highlighted portion in
Figure 2-8 when this step is complete.
Figure 2-8 Virtual Fibre Channel client adapter created in client partition profile
Note: A POWER Hypervisor has a limit of 32,000 pairs of WWPNs. If you
run out of WWPNs, you must obtain an activation code for an additional set
of 32,000 pairs.