Product data

52 PowerVM Migration from Physical to Virtual Storage
24.In response to the Select Media Adapter panel, type the number that
represents the virtual SCSI device that is mapped to the CD/ROM. In
Example 3-2 there is only a single device.
Example 3-2 Select Media Adapter
-------------------------------------------------------------------------------
Select Media Adapter
1. U8204.E8A.10FE411-V3-C7-T1 /vdevice/v-scsi@30000007
2. None
3. List all devices
-------------------------------------------------------------------------------
Navigation keys:
M = return to Main Menu
ESC key = return to previous screen X = eXit System Management Services
-------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key:
Navigate through the menus to exit from SMS mode, which now starts a
normal install from the virtual media device that was loaded
(cd_image_82472.1).
During the install you may be prompted for other volumes. This example has four
in total. Each time that this happens eject/unload the current volume and load the
new media.
The next three steps show this cycle which you will repeat for each requested
volume:
25.Unload the current volume using the unloadopt command:
$ unloadopt -vtd vtopt1
26.Create virtual optical media using the next volume of the files that you copied
from the source dedicated system. If you have enough space in your
Tip: When the first volume starts to restore, you may get an error on the
screen to the effect that the hard disk device is different from what was
recorded when the CD image was created. This is to be expected and you
can enter 1 to continue the install.