Product data

58 PowerVM Migration from Physical to Virtual Storage
max_transfer 0x40000
Maximum TRANSFER Size True
node_name 0x200200a0b811a662 FC
Node Name False
pvid none
Physical volume identifier False
q_err yes Use
QERR bit True
q_type simple
Queuing TYPE True
queue_depth 10 Queue
DEPTH True
reassign_to 120
REASSIGN time out value True
reserve_policy single_path
Reserve Policy True
rw_timeout 30
READ/WRITE time out value True
scsi_id 0x11000 SCSI
ID False
start_timeout 60 START
unit time out value True
unique_id 3E213600A0B8000291B0800009AE303FEFAE10F1815 FAStT03IBMfcp Unique
device identifier False
ww_name 0x201300a0b811a662 FC
World Wide Name False
#
Note the unique_id as highled in the previous output. For additional
information refer to 2.2, “Checking unique disk identification” on page 13.
6. Use the AIX extendvg command to add the SAN disk to the root volume
group:
$ extendvg rootvg hdisk8
Note: Do not proceed if the extendvg returns an error. The IBM InfoCenter
has detailed instructions for the most common scenarios. Use the following
URL to look for suggestions:
http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic
=/com.ibm.aix.baseadmn/doc/baseadmndita/mirrorootvg.htm