System information

Christie/Mirage/DLV/Matrix Parts and Module Replacement
10 020-100012-01 Rev. 1 (04/07)
Figure 1. Removing Projector Covers
AC Relay Module
(10 minutes)
The AC relay module is located in the front, left corner of the projector (near the
IR sensor). It is mounted to the ballast cover. To remove and replace:
1. Remove the top cover. See Top Cover.
2. Disconnect J59 and J60 from the AC relay module. (Figure 2.)
3. Remove the AC relay from its standoffs (four screws).
Figure 2. Location of AC Relay Module