System information

Parts and Module Replacement Christie/Mirage/DLV/Matrix
020-100012-01 Rev. 1 (04/07) 19
3. Remove the black exhaust duct located just in front of the fan – three (3)
screws. (Figure 15.)
4. Remove the four (4) screws securing the fan to the light engine.
5. Remove the fan assembly.
Figure 15. Accessing the Green DMD Fan
When replacing any of these fans, repeat instructions in reverse.
Make sure each fan is mounted so that the wire exits toward the top of the
light engine. (Figure 16.)
Figure 16. DMD Fan Wire Routing