System information

Christie/Mirage/DLV/Matrix Parts and Module Replacement
2 020-100012-01 Rev. 1 (04/07)
Use the instructions provided in this booklet to replace any of the serviceable
components in the following projectors:
• Christie DS+6K (38-DSP104-x5)
• Christie DS+5Kc (38-DSP104-x8)
• Christie DS+8K (38-DSP106-x3)
• DLV1400-DX (38-DSP102-x5)
• DLV1920-DX (104-017101-xx)
• Christie DW3K/Kc (38-DHD103-x3, 38-DHD103-x4)
• Christie DW6K/Kc (38-DHD106-x3, 38-DHD106-x4)
• Christie HD6K (104-006101-xx)
• Christie HD5Kc (104-007101-xx)
• Christie HD8K (104-008101-xx)
• Christie HD7Kc (104-018101-xx)
• Mirage S+3K (38-DSP102-x4)
• Mirage S+6K (38-DSP104-x6)
• Mirage S+8K (38-DSP106-x4)
• Mirage HD3 (104-012101-xx)
• Mirage HD6 (104-013101-xx)
• Mirage HD8 (104-014101-xx)
• Matrix S+2K (38-DSP102-x6)
• Matrix S+5K (38-DSP104-x7)
• Matrix HD2 (104-023101-xx)
• Matrix HD4 (104-016101-xx)
• Matrix HD7 (104-024101-xx)
Read the Safety and Warning guidelines provided on page 8 before servicing the
unit. All service procedures must be performed by qualified personnel only.
The following abbreviations are used throughout the manual.
BPM Backplane Module
DMD Digital Micromirror Device
DSBP Dual-Slot Backplane Module
HD High Definition
HDPD High Definition Panel Driver
HVPS High Voltage Power Supply
LVDS Low Voltage Differential Signal
LVPS Low Voltage Power Supply
PPM Post Processing Module
SSBP Single Slot Backplane Module
TCPD Three Chip Panel Driver
TIPM Ten-Bit Image Processing Module
Disclaimer
Every effort has been made to ensure that the information in this manual is accurate and reliable. Due to
constant research, however, information is subject to change without notice. Christie assumes no
responsibility for omissions or inaccuracies. Updates to this manual are published regularly as required.
Contact Christie for availability.