System information

Christie/Mirage/DLV/Matrix Parts and Module Replacement
30 020-100012-01 Rev. 1 (04/07)
Figure 37. Remove Exhaust Duct
7. Remove the green DMD fan (in 1000W and 1200W models) – four (4) - #1
Phillips screws. See Fans, Green DMD.
8. Remove the lamp louver, located on the right side of the projector by the
optics tray (four screws).
9. Remove the four (4) - #1 Phillips screws retaining the integrator cover
(Figure 38.) and then remove the cover.
Figure 38. Remove Integrator Rod Cover
10. Unscrew and remove the thumbwheel/standoff retaining nut and spring
clip using a 7/32” socket (Figure 39.)
Figure 39. Remove Thumbwheel/Standoff