System information

Christie/Mirage/DLV/Matrix Parts and Module Replacement
46 020-100012-01 Rev. 1 (04/07)
Figure 65. Projection Lens Components
Figure 66. Remove the Projection Lens
Shutter Assembly
(15 minutes)
The shutter is located between the light engine and the lens. To remove and
replace:
1. Remove the projection lens. See Projection Lens for instructions.
2. Remove the top cover. See Top Cover.
3. Disconnect the harness to the shutter by loosening the two cable clamps. Then
free the harness.
4. Remove the two (2) screws securing the shutter assembly (shutter bracket and
shutter) to the light engine. Pass the assembly through the opening in the lens
bezel to remove. (Figure 67.)