System information

Parts and Module Replacement Christie/Mirage/DLV/Matrix
020-100012-01 Rev. 1 (04/07) 47
Figure 67. Remove Shutter Assembly
5. Remove the two (2) screws securing the shutter assembly to the mounting
bracket. (Figure 68.)
Figure 68. Separate Shutter from Mounting Bracket
When replacing the shutter, repeat instructions in reverse.
Ten-Bit Image Processing Module (TIPM)
(20 minutes)
1. Remove the TIPM card cage. See Card Cage (TIPM) for removal instructions.
2. Remove the faceplates from optional inputs. (Figure 69.)
3. Remove the hardware from all connectors on the input panel.
4. Remove four (4) screws from the input panel used to secure the card guides.
5. Remove the DSBP to free the TIPM. See Dual Slot Backplane Module
(DSBP).