System information

Christie/Mirage/DLV/Matrix Parts and Module Replacement
48 020-100012-01 Rev. 1 (04/07)
Figure 69. Projector Input Panel
Three Chip Panel Driver (TCPD)/High Definition Panel Driver (HDPD)
(19 minutes)
The TCPD/HDPD is located at the top of the projector (front) and is connected to
the TIPM module. It is the module where most harness connections are made. To
remove and replace:
1. Remove the top cover. See Top Cover for instructions.
2. Disconnect all cable connections to the TCPD/HDPD.
3. Remove the six (6) screws securing the TCPD/HDPD, then carefully pull and
lift the board to the front of the projector to remove.
Figure 70. Panel Driver Cable Connections