User manual

E Series User Manual

020-000515-01 Rev. 1 (06-2012)

Section 4: Operation

4-15

adjusted to optimize picture quality.

Color wheel Index (3x): Set Color wheel index to Speed 3X. This setting

only needs to be used when the Main Board is changed, and should be

adjusted to optimize picture quality.

Error log: Show the projector error log for debug.

Mode Adjustment: Fine tune the H and V start position for a signal in the

EDID timing table and record the values in the system to override the

timing table. The settings must be “Saved to Record” before exiting the

menu, or they will be lost. To revert to original timing table settings, each

setting must be manually cleared. Factory Defaults will not clear these

override settings.