User manual
Section 1: SAFETY
GS Series User Manual
020-000724-01 Rev. 1 (05-2014)
1-2
Important Laser Notice
Complies with 21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
IEC 60825-1:2007
WARNING
.
• This projector is a Class 2 laser device that conforms with IEC 60825-
1:2007 and CFR 1040.10 and 1040.11
• Class 2 laser product, Do Not Stare Into Beam
• This projector has built-in Class 4 laser module. Disassembly or
modification is very dangerous and should never be attempted.
• Any operation or adjustment not specifically instructed by the user's guide
creates the risk of hazardous laser radiation exposure.
• Do not open or disassemble the projector as this may cause damage by the
exposure of laser radiation.
• Do not stare into beam when the projector is on. The bright light may result
in permanent eye damage.
• Without following the control, adjustment or operation procedure may
cause damage by the exposure of laser radiation.
Warning
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
MAX OUTPUT:8.0mW
WAVE LENGTH:440~455nm