User manual

Appendix A: Menu Tree
Mirage J Series User Manual A-3
020-100708-01 Rev.1 (11-2011)
Main Menu
1. Size & Position 2. Image Settings 3, Channel Setup 4. Configuration 5. Lamp 6. Status 7. Secondary Input & Switching 8. Language 9. Test Pattern
Size & Position
1. Resize Presets 2. Size 3. Vertical Stretch 4. Pixel Track 5. Pixel Phase 6. H-Position 7. V-Position 8. Keep Aspect on Auto Setup 9. Blanking
Blanking
Active Input Window
1. Top Blank 2. Bottom Blank 3. Left Blank 4. Right Blank
Channel Setup
This is a list of all of the channels that have been defined for this projector.
Channel Edit:
Card Type H-Frequency V-Frequency Interlaced Sync Source 1. Name 2. Channel 3. Slot 4. Input 5. In Menu 6. Auto Select 7. Locked 8. Previous Channel 9. Next Channel
Select Channel Operation
Edit Channel Copy Channel Delete Channel Delete Unlocked Only Delete All Channels
Press <Enter>
on a channel
Advanced Main
See Page A4 for Configuration
Image Settings
1. Contrast 2. Brightness 3. Reserved 4. Color Space 5. Video Options 6. Input Levels 7. Advanced Image Settings
Video Options
1. Enable Decoder AGC 2. Video Standard 3. Input Video Black 4. Color 5. Tint 6. Filter 7. Sampling Mode 8. Film Mode Detect 9. Chroma/Luma Delay 10. Adaptive Contrast 11. Split Screen 12. RGB Quantization Range
Input Levels
1. Auto Input Level 2. Red<Pr> Blacklevel 3. Red<Pr> Input Drive 4. Green<Y> Blacklevel 5. Green<Y> Input Drive 6. Blue<Pb> Blacklevel 7. Blue<Pb> Input Drive 8. Auto Color Enable 9. Clamp Location 10. Input Peak Detector 11. Color Enable
Advanced Image Settings
1. Gamma Settings 2. Detail Settings 3. Noise Reduction Settings 4. Color Settings 5. Reserved 6. 3D Settings
Gamma Settings
1. Gamma Correction 2. Gamma 3. Gamma Function 4. Gamma Slope
Detail Settings
1. Detail 2. Texture Enhancement 3. Detail Threshold 4. Detail Overshoot 5. Split Screen
Noise Reduction Settings
1. Noise Reduction 2. Block Artifact Reduction 3. Mosquito Noise Reduction 4. Split Screen 5. Full Screen Eye-Motion Filter 6. Eye-Motion Filter
Color Settings
1. Select Color Adjustment 2. Color Temperature
Lamp
1. Lamp Mode 2. Power 3. Intensity 4. Optical Aperture 5. Warn when lamp reaches (hours) 6. Lamp 1 s/n 7. Change Lamp 8. Lamp 1 History
Input Old Lamp Serial Number
1. Old Lamp Serial Number 2. Continue 3. Abort
Change Lamp
1. New lamp Serial Number 2. Change Lamp
Secondary Blanking
Active Input Window
1. Top Blank 2. Bottom Blank 3. Left Blank 4. Right Blank
Secondary Image Settings
1. Contrast 2. Brightness 3. Reserved 4. Color Space 5. Secondary Video Options 6. Secondary Input Levels 7. Secondary Advanced Image Settings
Secondary Video Options
1. Enable Decoder AGC 2. Video Standard 3. Input Video Black 4. Color 5. Tint 6. Filter 7. Sampling Mode 8. Film Mode Detect 9. Chroma/Luma Delay 10. Adaptive Contrast 11. Reserved 12. RGB Quantization Range
Secondary Advanced Image Settings
1. Secondary Gamma Settings 2. Secondary Detail Settings 3. Secondary Noise Reduction Settings 4. Secondary Color Settings 5. Reserved 6. Reserved
Secondary Gamma Settings
1. Gamma Correction 2. Gamma 3. Gamma Function 4. Gamma Slope
Secondary Detail Settings
1. Detail 2. Texture Enhancement 3. Detail Threshold 4. Detail Overshoot 5. Reserved
Secondary Noise Reduction Settings
1. Noise Reduction 2. Block Artifact Reduction 3. Mosquito Noise Reduction 4. Reserved 5. Full Screen Eye-Motion Filter 6. Eye-Motion Filter
Secondary Color Settings
1. Select Color Adjustment 2. Color Temperature
Secondary Input Levels
1. Auto Input Level 2. Red<Pr> Blacklevel 3. Red<Pr> Input Drive 4. Green<Y> Blacklevel 5. Green<Y> Input Drive 6. Blue<Pb> Blacklevel 7. Blue<Pb> Input Drive 8. Auto Color Enable 9. Clamp Location 10. Peak Detector 11. Color Enable
Secondary Input & Switching
1. Main Input 2. Secondary Input 3. Swap Main & Secondary inputs 4. PIP Enable 5. PIP Window Options 6. Secondary Size & Position 7. Secondary Image Settings 8. Fade Time 9. Frame Locking 10. Auto Input Searching 11. HDMI Output Loop Source 12. Standby Active Loop-Through
PIP Window Options
1. PIP Position Presets 2. PIP Window Size 3. PIP H-Position 4. PIP V-Position 5. PIP Border Width 6. PIP Border Color
Secondary Size & Position
1. Resize Presets 2. Size 3. Vertical Stretch 4. Pixel Track 5. Pixel Phase 6. H-Position 7. V-Position 8. Keep Aspect on Auto Setup 9. Secondary Blanking
3D Settings
3D State
1. 3D Mode 2. Dark Interval 3. 3D Sync Input 4. Invert 3D Input 5. 3D Sync Output 6. 3D Stereo Sync Delay 7. 3D Test Pattern 8. Test Pattern 9. Set Frame Delay 10. Actual Frame Delay 11. Full Screen Eye-Motion Filter 12. Eye-Motion Filter 13. Edit Secondary Channel Settings 14. Main Input 15. Secondary Input 16 Display 3D Message Boxes