User manual

Appendix A: Menu Tree
Mirage J Series User Manual A-5
020-100708-01 Rev.1 (11-2011)
Configuration
1. Language 2. Output Options 3. Lens Settings 4. Power Management 5. Date & Time 6. Menu Preferences 7. Communications 8. Geometry & Color 9. Diagnostics & Calibration 10. Service 11. Option Card Settings 12. Reserved
Advanced Main Menu continued
Color Adjustments by X,Y
1. Select Color Adjustment 2. Color Temperature
Valid Color Space
3. Red X 4. Red Y 5. Green X 6. Green Y 7. Blue X 8. Blue Y 9. White X 10. White Y 11. Reserved 12. Auto Color Enable 13. Color Enable 14. Copy From
Color Saturation
1. Select Color Adjustment 2. Red Part of Red 3. Green Part of Red 4. Blue Part of Red 5. Green Part of Green 6. Red Part of Green 7. Blue Part of Green 8. Blue Part of Blue 9. Red Part of Blue 10. Green Part of Blue 11. Red Part of White 12. Green Part of White 13. Blue Part of White 14. Reserved 15. Auto Color Enable 16. Color Enable 17. Copy From 18. Lamp
Geometry & Color
1. Test Pattern 2. Geometry Correction 3. Brightness Uniformity 4. Edge Blending 5. Color Adjustments by X,Y 6. Color Saturation 7. Black Level Blending 8. Default Color Adjustment 9. Reserved 10. Tiling Setup
See Page A3 for Lamp
Brightness Uniformity
1. Brightness Uniformity Enable 2. Test Pattern 3. Coarse Adjustment 4. Top Left Corner 5. Left Side 6. Bottom Left Corner 7. Top Right Corner 8. Right Side 9. Bottom Right Corner 10. Center 11. Overall Gain 12. Full Screen Eye-Motion Filter 13. Eye-Motion Filter 14. Reset Brightness Uniformity Settings
Edge Blending
1. Edge Blending 2. Test Pattern 3. Left Blend Width 4. Right Blend Width 5. Top Blend Width 6. Bottom Blend Width 7. Lamp 8. Show Blending Overlap 9. Advanced Edge Blending 10. Full Screen Eye-Motion Filter 11. Eye-Motion Filter 12. Reset Edge Blending Settings
See Page A3 for Lamp
Black Level Blending
1. Black Blend Enable 2. Test Pattern 3. Left Blend Width 4. Right Blend Width 5. Top Blend Width 6. Bottom Blend Width 7. Center Brightness 8. Left Brightness 9. Right Brightness 10. Top Brightness 11. Bottom Brightness 12. Top Left Brightness 13. Top Right Brightness 14. Bottom Left Brightness 15. Bottom Right Brightness 16. Reset Black Level Blending Settings
Advanced Edge Blending
1. Enable Advanced Curve 2. Left Blend Shape 3. Left Blend Midpoint 4. Right Blend Shape 5. Right Blend Midpoint 6. Top Blend Shape 7. Top Blend Midpoint 8. Bottom Blend Shape 9. Bottom Blend Midpoint 10. Reset Advanced Edge Blending Settings
SeePageA4for:
1. Language 2. Output Options 3. Lens Settings 4. Power Management 5. Date & Time 6. Menu Preferences 7. Communications 11. Option Card Settings
Geometry Correction
1. Geometry Correction 2. Test Pattern 3. Adjust Horizontal Keystone 4. Adjust Vertical Keystone 5. Adjust 2D Keystone 6. Reset Keystone settings
Tiling Setup
1. Tiling Setup 2. Total Rows 3. Total Columns 4. Row 5. Column
Diagnostics & Calibration
1. Test Pattern 2. Grey Level 3. Freeze Image 4. Color Enable 5. Input Peak Detector 6. Input Level Detector 7. Level Detector Threshold 8. Aspect Ratio Overlay 9. Test Pattern Color Swap 10. Calibrate LiteLoc
Calibration Status
11. Freeze Image During Auto Setup
Service
1. Reserved 2. Reserved 3. Color Primary Settings 4. Reserved 5. Reserved 6. Replace Backplane 7. Remote Access Level 8. Restore Factory Defaults 9. Erase Data Files 10. Delete All Real Time Events 11. Status
Requires the service password to enter this menu
Color Primary Settings
1. Red X 2. Red Y 3. Green X 4. Green Y 5. Blue X 6. Blue Y 7. White X 8. White Y 9. Reserved 10. Auto Color Enable 11. Color Enable 12. Reset to Factory Color Primaries? 13. Reserved 14. Reserved
Remote Access Level
1. Remote Access Level (Ethernet) 2. Remote Access Level (RS-232 IN) 3. Remote Access Level (RS-232 OUT) 4. Remote Access Level (RS-422)
Main Menu
1. Size & Position 2. Image Settings 3, Channel Setup 4. Configuration 5. Lamp 6. Status 7. Secondary Input & Switching 8. Language 9. Test Pattern