User manual

26
PJ Network Manager for Windows
020-000388-01 Rev.1 (05-2011)
Chapter 3 Basic Operation
About event treatment
If the PJ Network Manager receives an event, it executes following event treatment items
which are selected in the system default setting.
p Sound warning alarm
p Send e-mail
p Display warning dialog
0 For the further information of event, type, warning column and warning value, see the item
"Viewing the event log" (+p.23).
0 The setting of event treatment, refer to item "Setting up default setting" (+p.17).
From: Test1<[e-mail]> (management
file name)
Date : 2004/10/29 21:30
To : [e-mail]
Subject : Alert message
----------------------------------------------------------
Alert has occurred
* Accrual date : 2004/10/29 21:13:42
* Target name : Proj_10
* IP address : 192.168.1.101
* Event : ALERT
* Type : ON
* Warning column : Power status
* Warning value : Power failure
Notes on using Windows XP Service Pack 2 (SP2) / Windows Vista / Windows 7
Windows Firewall is turned on by default in Windows XP SP2, Windows Vista, and Windows 7. Due
to this Windows Firewall, the send e-mail function is not available. When using this mail func-
tion, you need to cancel the block for PJ Network Manager application. For the further details of
Windows Firewall, see Windows help on your computer.
Sound warning alarm
If the PJ Network Manager receives an event, the computer beeps an alarm sound. The
alarm sound is depending on your computer sound setting.
0 The alarm sound is not made when your computer does not provide any speaker or the sound vol-
ume is muted.
Send e-mail
Following example message is sent to the e-mail address you set up as the destination
mail address.