User manual

6-26 CP2210 User Manual
020-100410-08 Rev. 1 (05-2014)
Section 6: Projector Menus
6.14.2 Lamp History Window
The Lamp History window displays a list of the previous and current lamps installed in the cinema projector.
Tap Menu > Advanced Setup > Lamp History.
You cannot remove a lamp from the list after you add it.
Table 6.13 Lamp History Window
Control Description
Date The date the lamp was installed.
Lamp Type The lamp type.
Serial Number The lamp serial number.
Hours The number of hours the lamp has operated.
Expiry Hours The number of hours the lamp operates before it is replaced.
Rotated Specifies if the lamp has been rotated.
Reason The reason for changing the lamp.
Add Lamp
Tap Add Lamp to open the Add Lamp window. See
Add Lamp Window, on page 6-27.
Acknowledge
Lamp Rotation
Acknowledge the lamp has been rotated.
Figure 6-19 Advanced Setup: Lamp History Window