User manual

102
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Chapter 6 Network Viewer
 When the file error is occurred during the auto-display, you may have the alert e-mail message.
For further information, please see item "3 Option selection for sending alert mail". ( p.40)
Error information
Error type
Description
File Error It is displayed when the network unit cannot acquire the correct file imag-
es from the FTP server, or when the master projector is turned off during
the multi-control.
Click Error button to check the details.
Connection Error It may be displayed when the slave projector is using the Network Viewer
or Capture function during the multi-control. Check which projector has an
error , see item "Multi Control/Check & Change". ( p.65-66)
[2] Control by the projector
Select input mode of the projector to "Network" previously.
1. Select "Network Viewer" in the "Network" menu. Press point button  or SELECT but-
ton.
2. Select "Display mode" and press SELECT button, and then select "Auto" or "Manual" and
then press SELECT button. When selecting "Auto", set "Display length", "Endless play"
and "Repeat times".
3. Select "Connect" and then press SELECT button to start displaying. The images in the
FTP server are displayed on the screen.
 It enables you to browse the images by using the point buttons
!
on the remote control or
on the projector.
: Previous image display,
!
: Next image display
4. To end displaying, select "Disconnect" and then press SELECT button.
PC4 PC3 PC6
PC5
PC1 PC2

JPEG
Prog.
JPEG
PJ2
PJ1
Project JPEG
images with PC2.
Downloaded From projector-manual.com Christie Manuals