User manual

109
ENGLISH
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Use of telnet
4. Type the commands, refer to below table, to control the projector and then press
"Enter" key for termination. For example, type "C00" which is a command to turn on the
projector, and press "Enter" key. Confirm the projector is turning on.
To disconnect the communication, press "Ctrl" key and "]" key at the same time, type
"close" and then press "Enter" key on the Keyboard.
> close [return]
The table below shows the typical command lists for controlling this projector and
please consult your local dealer for further information of another commands.
Command Function
C00 Power on
C01 Power off
C05 Selects input1
C06 Selects input2
C07 Selects input3
C09 Volume up
C0A Volume down
C0B Audio Mute on
C0C Audio Mute off
C0F Screen Normal size
C10 Screen Wide size
C1C Menu display on
C1D Menu display off
Command list table
* Enter with ASCII 64-byte capital characters and one-byte characters.
Downloaded From projector-manual.com Christie Manuals