User manual

19
ENGLISH
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
1. Disconnect the AC plug from the projector.
2. Connect the STP straight cable to the LAN port on the network unit.
3. Connect the STP straight cable to the hub.
Connection of LAN cable
To connect to the network, it is required to use the STP (Shielded Twisted Pair) straight cable
with RJ-45 plug. Prepare the Hub (10Base-T or 100Base-TX) to distribute the network cable if
required.
 Use the STP cross cable when you connect the computer and projector directly not using the
hub.
 The length of cable between hub and projector should be less than 100m.
Installation and network configuration
Hub
(10Base-T, 100Base-TX)
UTP straight cable
Downloaded From projector-manual.com Christie Manuals