User manual

CCM-LX User Manual

020-000326-01 Rev.1 (10-2010)

Chapter 2 Installation

Network PIN code setting

The Network PIN code can be set to restrict access to the setting page of the projector

using the web browser.

 Default Network PIN code [0000] means no Network PIN code is set.

1. Displaying Network PIN code menu

Select network menu and then select "Network PIN code" sub menu. Press point but-

ton



or SELECT button to display the Network PIN code entry pallet.

2. Entering the Network PIN code

To enter the Network PIN code, use point buttons

! 

on the projector or the

remote control.

3. Fixing the Network PIN code

After entering a 4-digit number, select "Set" by using point buttons



and then press

SELECT button.

 The remote control 10-key buttons can be used for entering the Network PIN code. See item

"How to enter the numbers with the remote control 10-key buttons". ( p.23)

 It is recommended to set up the Network PIN code when you connect the projector to the net-

work. This setting is carried out through the projector’s menu and also it can be set through the

network using the web browser. For further information, refer to item "Initial setting/Network PIN

code setting". ( p.35)

 Valid characters for the Network PIN code are only numbers 0 to 9. The number "0000" means no

Network PIN code is set.

 This Network PIN code is not to restrict the use of the projector. This Network PIN code is to set

the security against the use of the projector through the network.

Move the red frame sequentially left or right

with point buttons



Enter the nunbers with

point buttons

! 

Downloaded From projector-manual.com Christie Manuals