User manual

42
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Chapter 3 Basic Setting and Operation
The SNMP agent provided with this product is based upon MIB-2 defined by RFC1213. For private
MIB information, refer to file "Mibinfo/13PjNetPlus2.mib" in the CD-ROM.
SNMP setting
This product provides a SNMP (Simple Network Management Protocol)
agent function. The SNMP consists of a manager and agents. The group
which communicates information each other with SNMP is called
"Community". There are two access modes in a community, Refer (read) and Set (read- write).
This product allows to use Refer only (read only). The SNMP message informs the projector
status called "Trap" to an administrator. Click
SNMP Setting on the main menu and set up
each item.
Item Description
Contact .................. Enter user name of the projector etc. (optional)
Place ........................Enter place of the projector. (optional)
Community
name(refer) ........ Enter community name (read only). Default name
is "public".
PJ information
Downloaded From projector-manual.com Christie Manuals