User manual

46
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)
Chapter 4 Controlling the Projector
Item Description
PJ status
Power ......................... Displays the status of the lamp.
(ON, OFF, On starting up, On cooling down, Service in need)
Status .......................... Displays the status of the projector's power. (Refer to next page.)
Power control ........ Controls the projector power by clicking the "ON" or "Standby" button.
PJ temp.
Inside temp.A ........ Displays the surrounding temperature of lamp in the projector. (Sensor B)
Inside temp.B ........Displays the surrounding temperature of panel in the projector. (Sensor C)
External temp. ......Displays the surrounding temperature of the intake vent. (Sensor A)
......... The warning icon will appear if the temperature exceeds a specified value.
Check if there is no object to obstruct the airflow around the intake or exhaust
vent. It might be airfilter clogged. Replace the airfilter with new one.
* The temperature unit can be set either Centigrade or Fahrenheit in item "Initial
Setting". (p.34)
Power control and status check
Click Power & Status on the main menu. The control page will be dis-
played. By clicking ON or Standby button on the page, the power of the
projector can be controlled.
Popup confirmation window
Confirmation window
as shown in the below
appears when the
Standby
button is pressed.
Downloaded From projector-manual.com Christie Manuals